NiceGuy Posted July 15, 2011 Report Share Posted July 15, 2011 Trim will automatically rise without touching any buttons???? Trim will rise from lowest position to highest with one touch on the button???? Trim will rise back to the top when trimmed half way down??? Cant figure this one out?? All switches will make it rise to top with one touch except the bow trim button.. Sometimes trim will work fine but after a few mins will rise again?? Thanks for any info... Link to comment Share on other sites More sharing options...
brwnbass Posted July 15, 2011 Report Share Posted July 15, 2011 Check your relays for water & or replace them. Mine did thesame thing & it was just condensation. Clean the plug out with contact cleaner & put some electric grease on them & it should be ok. If not, check your trim switch for the same thing. Link to comment Share on other sites More sharing options...
NiceGuy Posted July 15, 2011 Author Report Share Posted July 15, 2011 Check your relays for water & or replace them. Mine did thesame thing & it was just condensation. Clean the plug out with contact cleaner & put some electric grease on them & it should be ok. If not, check your trim switch for the same thing. where are the relays?? Link to comment Share on other sites More sharing options...
hung up Posted July 15, 2011 Report Share Posted July 15, 2011 around your batterys up high Link to comment Share on other sites More sharing options...
NiceGuy Posted July 15, 2011 Author Report Share Posted July 15, 2011 around your batterys up high ok...the little boxes on top of the terminal...thanks Link to comment Share on other sites More sharing options...
Mountainman Posted July 16, 2011 Report Share Posted July 16, 2011 Sounds alot like a short to me. If youve got concealed tilt/trim control on the wheel, alot of times, the binding of those wires can cause shorts there. Thats a good place to start huntin a short. Link to comment Share on other sites More sharing options...
Jamie De Vera Posted July 16, 2011 Report Share Posted July 16, 2011 Sounds alot like a short to me. If youve got concealed tilt/trim control on the wheel, alot of times, the binding of those wires can cause shorts there. Thats a good place to start huntin a short. +1.... hope you get everything figured out Link to comment Share on other sites More sharing options...
BulletDeuce Posted July 16, 2011 Report Share Posted July 16, 2011 I've had mine short out at the front trim. Scared the chit out of me running down the lake. I've also had the trim stick on the motor mounted trim. Best ever was when I was fishing on Ft. Loudon with my old man & the trim stuck. We both ran to the front of the boat & I jumped for the trim as my dad landed on top of me. Link to comment Share on other sites More sharing options...
softbaitmaker Posted July 16, 2011 Report Share Posted July 16, 2011 My trim button on my control leaver has began to act up some and not as responsivve as it should be on up trim. Thinking about having trim put on wheel..... Link to comment Share on other sites More sharing options...
NiceGuy Posted July 17, 2011 Author Report Share Posted July 17, 2011 I figured it out guys!!!!......I disconnected the bow trim and the other trim switches work like a charm..No more rising on its on...Cant believe that one malfunctioned....gonna have to get me a new switch....thanks for all the ideas.... Link to comment Share on other sites More sharing options...
Wiseguy909 Posted July 17, 2011 Report Share Posted July 17, 2011 Good Deal! Glad you figured it out Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.